This is documentation for Bridge User Data Download (BUDD) Service.

Data Flow

• User requests their data in the app, specifying the start date and end date. (App may or may not supply default start and end dates.)

• The app calls Bridge REST API#UserData API with the start date and end date (requires user authentication).

• Bridge Server writes the request to an internal SQS queue. This request contains study ID, username, start date, and end date.

• BUDD reads from the SQS, aggregates the requested data (which takes roughly a minute, depending on the amount of data), and sends an email to the user with a link to where they can download the data. This link will expire after 12 hours.

BUDD Internal Structure

The main entry point into BUDD is BridgeUddWorker https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService/blob/develop/src/main/java/org/sagebionetworks/bridge/udd/worker/BridgeUddWorker.java. This contains:

• A loop which polls SQS for requests and parses those requests. (There is a wait time configured so that while testing, if you Ctrl+C out of the process, you don't get a bunch of errors from "can't connect to SQS".)

• Gets the study from DynamoDB (because accounts and data are partitioned by study).

• Gets the account from Stormpath by email address. (The code says username, but we recently changed Bridge Server so that all usernames are the same as email address, and everything just keys off email address.)

• Gets the health ID from the user's account and queries DDB with the health ID to get the health code.

• Queries DDB SynapseTables to get a list of all Synapse health data tables for that study and SynapseSurveyTables to get a list of all survey metadata tables for that study.

• Calls the SynapsePackager (https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService/blob/develop/src/main/java/org/sagebionetworks/bridge/udd/synapse/SynapsePackager.java) to download all the user's data from Synapse (within the specified date range). The SynapsePackager does the following.

  • It kicks off a bunch of async tasks for each Synapse table and for each survey table.

  • Some of these tasks are SynapseDownloadFromTableTask (https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService/blob/develop/src/main/java/org/sagebionetworks/bridge/udd/synapse/SynapseDownloadFromTableTask.java), which queries a Synapse table for the user's data by health code and date range, downloads the results as a TSV, and downloads all the file handles.

  • Some of these tasks are SynapseDownloadSurveyTask (https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService/blob/develop/src/main/java/org/sagebionetworks/bridge/udd/synapse/SynapseDownloadSurveyTask.java), which downloads the complete table of survey metadata as a TSV.

  • Zips up all files (TSVs and file handles) into a master zip file.

  • Uploads the master zip file to S3

  • Creates a pre-signed URL for the master zip file and returns the pre-signed URL to BridgeUddWorker.

• Emails the pre-signed URL back to the user.

Development

Local Development

Create a fork from https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService. Follow the steps in https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService/blob/develop/README.md (If you're only planning on running the code but not on editing, you should be able to pull from the root fork directly.)

Testing

First, make sure your test account has uploads for the time range you want to test with.

To test through the Bridge Server, use the following example request:

POST https://webservices.sagebridge.org/v3/users/self/emailData
{
  "startDate":"2015-08-15",
  "endDate":"2015-08-19",
  "type":"DateRange"
}

To test against BUDD directly, log into the AWS Console, go to the SQS dashboard, and submit the following example request as an SQS message:

{
  "studyId":"api",
  "username":"dwayne.jeng+test01@sagebase.org",
  "startDate":"2015-07-23",
  "endDate":"2015-07-30"
}

Either method will send an email to your registered email address.

Deploy to Dev

Submit your code changes to your own personal fork. Create a pull request to the root fork. Once the pull request has been merged, Travis will automatically build and deploy to the dev server on Elastic Beanstalk.

Deploy to Staging/Prod

• Create a workspace from the root fork (https://github.com/Sage-Bionetworks/BridgeUserDataDownloadService) if you don't already have one.

• Make sure all branches are up to date (git pull as necessary).

• Go to the staging branch (git checkout uat), merge from develop (git merge --ff-only develop).

• Push back to GitHub (git push). This should trigger Travis to automatically build and deploy to the staging server on Elastic Beanstalk.

Similar steps for Prod.

Rolling Back Deployments

• Log into the AWS Console and go to the Elastic Beanstalk Dashboard.

• In the top nav bar drop down, go to Application Versions.

• You'll see a list of versions named travis-[git commit hash]-[timestamp in epoch seconds]. Check the version you want to roll back to and click Deploy.

• Select the environment from the drop down and click Deploy.

Access Logs

Logs can be found at https://logentries.com/. Credentials to the root Logentries account can be found at belltown:/work/platform/PasswordsAndCredentials/passwords.txt. Alternatively, get someone with account admin access to add your user account to Logentries.

If for some reason, the logs aren't showing up in Logentries, file a support ticket with Logentries. The alternate steps to reach the logs are below

• Log into the AWS Console and go to the Elastic Beanstalk Dashboard.

• Select the environment you want to view logs for.

• Click on Logs in the left nav bar.

• In the drop down (top right), click Request Logs.

  • Last 100 Lines will give you a link to a page with the logs on screen.

  • Full Logs will give you a link to a zip file you can download.

If this still doesn't work, you can SSH directly into BUDD hosts (see below) and find logs at /var/log/tomcat8/catalina.out

Logging Into BUDD Hosts

You may need to be in the Fred Hutch intranet or logged into the Fred Hutch VPN for this to work.

• Log into the AWS Console and go to the EC2 Dashboard.

• Click on Instances in the left nav bar.

• In the table, find the host(s) with the name Bridge-UDD-Worker-Dev (or whatever environment you want to log into). Select that host. (If there's more than one in the environment you want, select just one host.)

• In the information panel on the bottom, find the field Public DNS host. This is the hostname you want to SSH into. But first, you'll need the PEM file to log in.

• Log into belltown and download the PEM files from /work/platform/PasswordsAndCredentials

• On your machine, run ssh -i [path to PEM file] ec2-user@[EC2 hostname]