API for Authentication and Authorization

...

API for Authentication

Create User

POST httphttps://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/user
{"userId":"demouser", "email":"demouser@sagebase.org", "firstName":"demo", "lastName":"user", "displayName":"Demo User"}

Successful Response:

HTTP/1.1 201 Created

Missing password or user ID already exists:

HTTP/1.1 400401 Bad Request

...

Unauthorized

Note:  As a side effect this will send an email to the given address, prompting the user to set their password.

Send Change-Password Email

POST PUT httphttps://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/user
sessionToken:<sessionToken>/password/email
{"userIdemail":"demouser", "email":"demouser@sagebase.org", "firstName":"demo", "lastName":"user", "displayName":"Demo User"}

 where <sessionToken> is that returned by "Initiate Session", below.  Note the authentication service manage the properties shown (principally the userId and password) while the repository services (below) manage other related user attributes.

Successful Response:

}

Successful Response:

HTTP/1.1 204 No Content

If the email address is not in the user database:

HTTP/1.1 200404 OKNot 

...

Found

Set Password

HTTP/1.1 400 Bad Request
Content-Type: application/json
{"reason":"Not authorized."}

Send Change-Password Email

POST httpPOST https://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/user/userPasswordEmailpassword
{"userIdsessionToken":"demouser"abcdefgh-0123-4567-ijkl-mnopqrstuvwx", "password":"foobar"}

Successful Response:

HTTP/1.1 204 NONo CONTENT

Initiate Session (Login)

...

Content

Get Secret Key for HMAC Authentication

GET POST httphttps://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/session
{"userId":"demouser", "password":"demouser-pw"}

Successful Response:

secretKey

Successful Response:

HTTP/1.1 201 Created
Content-Type: application/json200 {"displayNamesecretKey":"Demo User","sessionToken":"AYcOhWIm9NdOC6BdzzzisQ000Ocy/cW/3WIdZg3Up9dguO4Kh5smBKpN7iWXAvVQqekGD3gT4nc7PWwlfOhcL+KW6W4PjXtgPQNhiP7yrwjfwQ=="}

Error Response, if the user authentication details are incorrect:Note: Session token is required in request header.  The returned key is that of the authenticated user.

Invalidate Secret Key

HTTP/1.1 400 Bad Request
AuthenticationURL: httpDELETE https://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/session
Content-Type: application/json
{"reason":"Unable to authenticate."}

Session token is valid for a period of time, currently set to 24 hours.

...

secretKey

Successful Response:

HTTP/1.1 204  No Content

Note: Session token or HMAC signature is required in request header.  The key which is invalidated is that of the authenticated user.

Initiate Session (Login)

Request:

POST PUT httphttps://auth-staging.sagebase-.org.elasticbeanstalk.com/auth/v1/session
{"sessionToken"email":"demouser@sagebase.org", "password":"AYcOhWIm9NdOC6BdzzzisQ00demouser-pw"}

Successful Response:

HTTP/1.1 200201 OK

Error Response, if the session token is invalid:

HTTP/1.1 404 Not Found
{"reason":"Unable to validate session."}

Terminate Session (Logout)

Request:

DELETE http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/session
{"sessionToken":"AYcOhWIm9NdOC6BdzzzisQ00"}

Response:

HTTP/1.1 204 NO CONTENT

Sample commands, issued from cURL:

Create User:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"userId\":\"NEWuser\", \"email\":\"demouser@sagebase.org\", \"firstName\":\"demo\", \"lastName\":\"user\", \"displayName\":\"Demo User\"}" -X POST http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/user

Update User:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"userId\":\"NEWuser\", \"email\":\"demouser@sagebase.org\", \"firstName\":\"NEWdemo\", \"lastName\":\"NEWuser\", \"displayName\":\"NEWDemo User\"}" -X PUT http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/user

Send Change Password Email:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"userId\":\"demouser\"}" -X POST http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/userPasswordEmail

Login:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"userId\":\"demouser\", \"password\":\"demouser-pw\"}" -X POST http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/session

Refresh session token:

curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"sessionToken\":\"QYNoamrOKK0dBhjZOFfbAg00\"}" -X PUT http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/session

Logout:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"sessionToken\":\"QYNoamrOKK0dBhjZOFfbAg00\"}" -X DELETE http://auth-sagebase-org.elasticbeanstalk.com/auth/v1/session

Access repository services anonymously:
curl -H Accept:application/json http://localhost:8080/repo/v1/dataset/test

Access repository services with session token (obtained by logging in):
curl -H Accept:application/json -H sessionToken:AprxPRzpmaPm7FXzV1ik0w00 http://localhost:8080/repo/v1/dataset/test

Authentication of Requests to Platform

Requests shall include a header named "sessionToken" whose value is that returned by the Initiate Session request, above.  (The session will timeout eventually, with a nominal duration of 24 hours.)

For requests that fail to be authenticated the response will include the headers:

WWW-Authenticate: authenticate Crowd

and a plain text body:  "The token provided was invalid or expired."

API for Authorization

(Note, the URL may migrate from that of the repository services to a separate location.)

Create Group

POST http://repositoryservice.sagebase.org/repo/v1/usergroup
{"name":"MyGroup", "creatableTypes":["type1","type2","type3"]}

Note: The group's name must be unique in the system.

Note: Only an administrator may specify the "creatableTypes" argument.  Other users must omit this field, or get an UnauthorizedException.

Retrieve Groups

GET http://repositoryservice.sagebase.org/repo/v1/usergroup

Retrieve Group

GET http://repositoryservice.sagebase.org/repo/v1/usergroup/{id}

Delete Group

DELETE http://repositoryservice.sagebase.org/repo/v1/usergroup/{id}

Update Group

(shallow properties)

PUT http://repositoryservice.sagebase.org/repo/v1/usergroup/{id}
{"name":"MyGroup", "creatableTypes":["type1","type2","type3"]}

Note: The group's name must be unique in the system.

Note: Only an administrator may specify the "creatableTypes" argument. Other users must omit this field, or get an UnauthorizedException.

Get the users in the system

GET http://repositoryservice.sagebase.org/repo/v1/user

Note: This provides the {uid} values for the following requests.

Update a user's shallow properties

PUT http://repositoryservice.sagebase.org/repo/v1/user/{uid}
{"userId":"mkellen", "iamAccessId":"asdfasfsf", "iamSecretKey":"asfsafsf"}

Note: It is not permissible to change the user's userId.
Note: The authentication services, above, manage the userId, password and other information complementary to these fields.

Add a user to the group

POST http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/users/{uid}

Remove a user from the group

DELETE http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/users/{uid}

Get all the users in a group

GET http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/users

Give a group access to a resource, specifying the allowable access types

POST http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/resources/{rid}
{"accessType":["READ","CHANGE","SHARE"]}

Remove all access to a resource from a group

DELETE http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/resources/{rid}

Find out the access types a group has for a resource

GET http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/resources/{rid}

Give a group access to a group, specifying the allowable access types

POST http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/group/{rid}
{"accessType":["READ","CHANGE","SHARE"]}

Remove all access to a group from a group

DELETE http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/group/{rid}

Find out the access types a group has for a group

GET http://repositoryservice.sagebase.org/repo/v1/usergroup/{gid}/group/{rid}
Created
Content-Type: application/json
{"sessionToken":"AYcOhWIm9NdOC6BdzzzisQ00", "acceptsTermsOfUse":"true"}

Note: If the "acceptsTermsOfUse" field is "false", then an additional call to accept the Synapse terms of use is required before the session token can be used for authenticated requests

Session token is valid for a period of time, currently set to 24 hours.

Refresh Token (reset timer)

Request:

PUT https://auth-staging.sagebase.org/auth/v1/session
{"sessionToken":"AYcOhWIm9NdOC6BdzzzisQ00"}

Successful Response:

HTTP/1.1 204 No Content

Error Response, if the session token is invalid:

HTTP/1.1 401 Unauthorized
{"reason":"Session token is not valid"}

Error Response, if the user has not signed the terms of use yet:

HTTP/1.1 403 Forbidden
{"reason":"Terms of use must be signed"}

Terminate Session (Logout)

 Note: Sessions initiated by multiple clients for the same user around the same time will receive identical "single sign on" tokens.  Since session termination is linked to the session token, terminating the session for one client via this command will have the side effect of terminating all sessions.  An alternative is for the client simply to delete its own copy of the token.

Request:

DELETE https://auth-staging.sagebase.org/auth/v1/session

Note: Session token is required in request header.

Response:

HTTP/1.1 204 No Content

Accept the Synapse Terms of Use

Request:

POST https://auth-staging.sagebase.org/auth/v1/termsOfUse
{"sessionToken":"AYcOhWIm9NdOC6BdzzzisQ00", "acceptsTermsOfUse":"true"}

Response:

HTTP/1.1 204 No Content

Note: The ToU are available at this URL:

https://auth-prod.sagebase.org/auth/v1/termsOfUse.html

Authentication via OpenID

Synapse supports authentication via OpenID with Google as the identity provider.  You as a client initiate the users identity verification with Google, and pass through the URL parameters to our REST api which will unpack the openID parameters, and verify the account. If login is successful a Session object will be returned. See the Synapse Authentication REST API documentation for details. 

Sample commands, issued from cURL:

Create User:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"email\":\"demouser@sagebase.org\", \"firstName\":\"demo\", \"lastName\":\"user\", \"displayName\":\"Demo User\"}" -X POST https://auth-staging.sagebase.org/auth/v1/user

Send Change Password Email:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"email\":\"demouser@sagebase.org\"}" -X POST https://auth-staging.sagebase.org/auth/v1/user/password/email

Login:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"email\":\"demouser@sagebase.org\", \"password\":\"demouser-pw\"}" -X POST https://auth-staging.sagebase.org/auth/v1/session

Refresh session token:

curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"sessionToken\":\"QYNoamrOKK0dBhjZOFfbAg00\"}" -X PUT https://auth-staging.sagebase.org/auth/v1/session

Logout:
curl -k -H "Content-Type:application/json" -H "Accept:application/json" -d "{\"sessionToken\":\"QYNoamrOKK0dBhjZOFfbAg00\"}" -X DELETE https://auth-staging.sagebase.org/auth/v1/session

Access repository services anonymously:
curl -H Accept:application/json https://repo-staging.sagebase.org/repo/v1/dataset/test

Access repository services with session token (obtained by logging in):
curl -H Accept:application/json -H sessionToken:AprxPRzpmaPm7FXzV1ik0w00 https://repo-staging.sagebase.org/repo/v1/dataset/test

Access repository services with HMAC-SHA1 signed request:
curl -i -H "Content-Type:application/json" -H "Accept:application/json" -H signatureTimestamp:2011-09-27T21:59:22.371-07:00 -H signature:yhMgokIH9ErQklj8oUuhHR5o5QM= -H userId:demouser@sagebase.org -X GET "http://localhost:8080/services-repository-0.7-SNAPSHOT/repo/v1/dataset?sort=name&limit=3"

Authentication of Requests to Platform

Authentication via Session Token

Requests shall include a header named "sessionToken" whose value is that returned by the Initiate Session request, above. (The session will timeout eventually, with a nominal duration of 24 hours.)

Authentication via Secret Key

Request shall include the following headers:

userId: demouser@sagebase.org
signatureTimestamp: 2011-07-16T19:20:30.45+01:00 (i.e. in ISO8601 format including time zone)
signature: <signature>

where <signature> is the HMAC-SHA1 hash created using the shared secret key generated above, and the hashed data is the concatenation:
userId + uri + signatureTimestamp

URI example: If the request is made to

https://repo-staging.sagebase.org/repo/v1/dataset?sort=name&limit=3

then the URI is:

/repo/v1/dataset

Authentication Failure

For requests that fail to be authenticated the response will include the headers:

WWW-Authenticate: "Digest" your email

and a plain text body:  "The token provided was invalid or expired."

API for Authorization

Default groups

Currently, there are two default groups that can be used to set permissions:

Get the users who can be added to a resource's ACL

GET https://repo-staging.sagebase.org/repo/v1/user?offset=1&limit=100

{"totalNumberOfResults":340,
    "results":[
        {"lastName":"Bar","etag":"403","ownerId":"273956","firstName":"Foo","displayName":"Foo Bar"},
        ....
    ],
    "paging":{"next":"/repo/v1/user?offset=101&limit=100"}
}

Get the groups who can be added to a resource's ACL

GET https://repo-staging.sagebase.org/repo/v1/userGroup

[
  {"name":"AUTHENTICATED_USERS","id":"1","creationDate":1307141423000,"uri":null,"etag":null,"individual":false},
  {"name":"PUBLIC","id":"2","creationDate":1307141423000,"uri":null,"etag":null,"individual":false},
  {"name":"Federation Group","id":"3","creationDate":1307141423000,"uri":null,"etag":null,"individual":false}
]

Note: The "name" fields returned from /user and /userGroup are used in the "groupName" fields in the ACLs shown below.

Get Access Control List for a Resource

Returns the ACL for the node responsible for the given node's permissions. Note: In the following example, 'id' is the id of the node to which permissions are attached; there is one 'resourceAccess' entry per UserGroup (aka 'principal') having access to the resource; 'groupName' is the name of the UserGroup object; 'accessType' is the list of types of access the given UserGroup has to the given resource.

GET https://repo-staging.sagebase.org/repo/v1/entity/{entity_id}/acl

{"id":"1",
 "creationDate":1307141851484,
 "uri":null,
 "etag":"0",
 "createdBy":"admin",
 "resourceAccess":[
	{"id":"1",
	 "groupName":"PUBLIC",
	 "accessType":["READ","CHANGE_PERMISSIONS","DELETE","UPDATE","CREATE"]
	}
 ],
 "modifiedBy":"admin",
 "modifiedOn":1307141851483
}

Create Access Control List for a Resource

Note: This is only used when the resource 'rid' currently inherits its access control list from an ancestor. This request causes 'rid' to cease ACL inheritance and instead use the ACL passed in with the request.

POST https://repo-staging.sagebase.org/repo/v1/entity/{entity_id}/acl
{"id":"{entity_id}",
 "resourceAccess":[
	{"groupName":"PUBLIC",
	 "accessType":["READ","CHANGE_PERMISSIONS","DELETE","UPDATE","CREATE"]
	}
 ]
}

Update Access Control List for a Resource

Note: This is only used when a "entity_id" already specifies its access control list (does not inherit from an ancestor).

PUT https://repo-staging.sagebase.org/repo/v1/entity/{entity_id}/acl
{"id":"1",
 "etag":"0",
 "resourceAccess":[
	{"id":"1",
	 "groupName":"PUBLIC",
	 "accessType":["READ","CHANGE_PERMISSIONS","DELETE","UPDATE","CREATE"]
	}
 ],
}

Delete Access Control List for a Resource

This deletes the given object's ACL, restoring its dependence on its owner's permissions.

DELETE https://repo-staging.sagebase.org/repo/v1/entity/{entity_id}/acl

Ask whether there is access to a Resource

Note: The query is asked for the user who is implied by the session token, or 'anonymous' if there is no token.

GET https://repo-staging.sagebase.org/repo/v1/entity/{entity_id}/access?accessType={accessType}

{"result":true}

API For Resource Access

The Synapse Authorization Services include support for creating abstract 'resources' and allowing users access.  The defined requests are shown below.  Note:  All requests must be authenticated, as described earlier in this document.

Authorize a User for a Resource

POST https://auth-staging.sagebase.org/auth/v1/resourceAccess/{resourceName}
{"userName":"demouser@sagebase.org", "userData":"some-user-data"}

Note:  The user executing this request must be a Synapse Administrator.

Successful Response:

HTTP/1.1 201 Created

Create a Resource-Access Session

POST https://auth-staging.sagebase.org/auth/v1/resourceSession/{resourceName}

Note:  The session is created for the user authenticated in the request.

Successful Response:

HTTP/1.1 201 Created
{"resourceAccessToken":"a1b2c3d4e5f6"} 

Unsuccessful Response:

HTTP/1.1 401 Unauthorized
{"reason": "Not authorized."}

Validate a Resource-Access Session

GET https://auth-staging.sagebase.org/auth/v1/resourceSession/a1b2c3d4e5f6

Note:  Though the request must be authenticated, the user making the request need not be the same as the user whose session is indicated by the passed token.  This allows (for example) a 'service account' to request authentication of tokens owned by real users.

Successful Response:

HTTP/1.1 200 OK
{"userName":"demouser@sagebase.org", "userData":"some-user-data"}

Unsuccessful Response:

HTTP/1.1 401 Unauthorized
{"reason": "Not authorized."}

API for User Profiles

Get your own profile

GET https://repo-staging.sagebase.org/repo/v1/userProfile

returns the profile of the authenticated user:

{
	"firstName":"Jane",
	"lastName":"Smith",
	"userName","janesmith@sagebase.org",
	"displayName":"Jane Smith",
	"rStudioUrl":"http://rstudiohost.sagebase.org",
	"ownerId":"1001",
	"uri":"/userProfile",
	"etag":"0"
}

Get another's profile

GET https://repo-staging.sagebase.org/repo/v1/userProfile/1001

returns the profile of the specified user, where "ownerId" is the "id" field returned in the "/user" request, described above, https://sagebionetworks.jira.com/wiki/display/PLFM/Authentication+and+Authorization+API#AuthenticationandAuthorizationAPI-GettheuserswhocanbeaddedtoaresourcesACL.

Note:  Private fields (e.g. "rStudioUrl") are omitted unless the requestor is the profile owner or an administrator.

{
	"firstName":"Jane",
	"lastName":"Smith",
	"displayName":"Jane Smith",
	"ownerId":"1001",
	"uri":"/userProfile",
	"etag":"0"
} 

Update your own profile

PUT https://repo-staging.sagebase.org/repo/v1/userProfile
{
	"firstName":"Jane",
	"lastName":"Smith",
	"userName","janesmith@sagebase.org",
	"displayName":"Jane Smith",
	"rStudioUrl":"http://rstudiohost.sagebase.org",
	"ownerId":"1001",
	"uri":"/userProfile",
	"etag":"0"
} 

Note:  The user associated with "ownerId" must match the identity of the authenticated user making the request, otherwise and Unauthorized response will occur.

Update another's profile

PUT https://repo-staging.sagebase.org/repo/v1/userProfile/1001
{
	"firstName":"Jane",
	"lastName":"Smith",
	"userName","janesmith@sagebase.org",
	"displayName":"Jane Smith",
	"rStudioUrl":"http://rstudiohost.sagebase.org",
	"ownerId":"1001",
	"uri":"/userProfile",
	"etag":"0"
} 

Note:  This API is available only to administrators.

Get a batch of Headers for Users and Groups

Synapse provides a batch UserGroupHeader service to fetch information about a collection of users or groups, specified by Synapse IDs. UserGroupHeaders contain a user's name, e-mail address, display name, and picture URL, when available.

GET https://repo-staging.sagebase.org/repo/v1/userGroupHeaders/batch?ids=1001,819

Note that ids are specified as request parameters at the end of the URL, separated by commas. In the example above, we are fetching headers for Synapse IDs 1001 and 819.

Get Users and Groups by email

This service can be used to search for synapse users by name or email:

GET {repo-endpoint}/userGroupHeaders?prefix=john.doe@somedomain.org

returns:

{'totalNumberOfResults': 1,
 'children':[
    {'displayName': 'John Doe',
     'firstName': 'John',
     'lastName': 'Doe',
     'pic': {'contentType': 'image/jpeg',
             'name': '1421211.jpg',
             'tokenId': '1444862/1421211.jpg',
             'previewId': '1444863/1421211.jpg',
             'md5': '3211e11de379bc62b70bd2a1fc49255e',
             'previewState': 'PREVIEW_EXISTS'},
     'email': 'joh...e@somedomain.org',
     'ownerId': '1421212',
     'isIndividual': True}],
 'prefixFilter': 'john.doe@somedomain.org'}

More Examples

Add a particular user with full access and identified individuals with read-only access to a project.

Get Request:

curl -H sessionToken:XXXXXXXXXXXXXXXXXX -H Content-Type:application/json -k  https://repo-staging.sagebase.org/repo/v1/project/498/acl

Get Response:

{
   "id":"3",
   "creationDate":1308274656084,
   "etag":"0",
   "createdBy":"nicole.deflaux@sagebase.org",
   "resourceAccess":[
      {
         "id":"4",
         "groupName":"AUTHENTICATED_USERS",
         "accessType":[
            "DELETE",
            "CHANGE_PERMISSIONS",
            "UPDATE",
            "READ",
            "CREATE"
         ]
      }
   ],
   "modifiedBy":"nicole.deflaux@sagebase.org",
   "modifiedOn":1308274656084,
   "uri":"/repo/v1/project/498/acl"
}

Update Request:

curl -H sessionToken:XXXXXXXXX -H Content-Type:application/json -X PUT -d '{
   "id":"3",
   "creationDate":1308274656084,
   "etag":"0",
   "createdBy":"nicole.deflaux@sagebase.org",
   "resourceAccess":[
      {
         "groupName":"AUTHENTICATED_USERS",
         "accessType":[
            "READ"
         ]
      },
      {
         "groupName":"nicole.deflaux@sagebase.org",
         "accessType":[
            "DELETE",
            "CHANGE_PERMISSIONS",
            "UPDATE",
            "READ",
            "CREATE"
         ]
      },
      {
         "groupName":"someuser@sagebase.org",
         "accessType":[
            "DELETE",
            "CHANGE_PERMISSIONS",
            "UPDATE",
            "READ",
            "CREATE"
         ]
      }
   ],
   "modifiedBy":"nicole.deflaux@sagebase.org",
   "modifiedOn":1308274656084,
   "uri":"/repo/v1/project/498/acl"
}' https://repo-staging.sagebase.org/repo/v1/project/498/acl

Update Response:

{
   "id":"3",
   "creationDate":1308274656084,
   "etag":"0",
   "createdBy":"nicole.deflaux@sagebase.org",
   "resourceAccess":[
      {
         "id":null,
         "groupName":"someuser@sagebase.org",
         "accessType":[
            "DELETE",
            "UPDATE",
            "CHANGE_PERMISSIONS",
            "READ",
            "CREATE"
         ]
      },
      {
         "id":null,
         "groupName":"nicole.deflaux@sagebase.org",
         "accessType":[
            "DELETE",
            "UPDATE",
            "CHANGE_PERMISSIONS",
            "READ",
            "CREATE"
         ]
      },
      {
         "id":null,
         "groupName":"AUTHENTICATED_USERS",
         "accessType":[
            "READ"
         ]
      }
   ],
   "modifiedBy":"nicole.deflaux@sagebase.org",
   "modifiedOn":1308274656084,
   "uri":"/repo/v1/project/498/acl"
}